Skip to content
Specialist since 1988

Applications by industry

Steel surface treatment for the metals and steel industry

Steel surface treatment for the metals and steel industry: blasting off mill scale and rust, treating wire, cable and band in-line, blacking steel at room temperature and cleaning dies. Phibo supplies the blast rooms, blast cabinets, in-line installations, wet blasting cabinets and the Blackfast blacking line for this work.

  • Our own service technicians and our own spare parts warehouse
  • Customers from Benelux to Poland and Romania
  • Surface technology specialist since 1988
Blaster in protective suit blasting a welded steel truss

These metals and steel companies work with Phibo

ArcelorMittalBekaertVandewieleWitzenmann

What gets treated in the metals and steel industry

In the metals and steel industry, it comes down to four things. Blasting off mill scale and rust before coating, cleaning wire, cable and band in the production line, blackening steel parts against corrosion and keeping dies clean.

Blue blast room with its door open onto the lit blasting area, in a workshop

Dry blasting

Blasting off mill scale and rust

An angular blasting medium such as steel grit or aluminium oxide breaks up the mill scale and the rust and gives the surface a roughness that a coating adheres to. Smaller parts go into a blast cabinet. Structural parts, profiles and welded steel structures are blasted by the operator in a blast room, with abrasive recovery and dust extraction.

EquipmentBlast cabinetsBlast roomsBlast pots

View the application →

Stranded steel cable with a matt treated finish above an untreated shiny cable

In-line treatment

Treating wire, cable and band in-line

An in-line surface treatment installation cleans and conditions metal wire, cable and band as they run through the machine. It is built into your existing production line and combines degreasing, conditioning, rinsing and drying.

View the application →

Blackened steel fitting next to an untreated one

Chemical blacking

Blacking steel at room temperature

With Blackfast you blacken steel and cast iron parts at around 20 °C, without a boiling bath and without dimensional change, in your own workshop. The immersion process for regular work, the blacking paste for single parts.

EquipmentBlackfast black oxide

View the application →

Round die plate, one half cleaned and the other still fouled

Wet blasting or ultrasonic cleaning

Cleaning dies and moulds

Deposits and production residue come out of dies, moulds and extruders without damaging the sharp edges, the fine profiles or the surface. Phibo recommends wet blasting, with an ultrasonic cleaner for fine channels and bores.

EquipmentWet blast cabinetsUltrasonic cleaners

View the application →

Frequently asked questions

Questions about metals and steel applications

Why is steel blasted before coating?

Because a coating adheres poorly to mill scale and rust. Blasting removes those layers and gives the steel a roughness that the coating adheres to. More on mill scale and rust removal.

Can mill scale be removed from wire in the production line?

Yes, with an in-line surface treatment installation from Phibo, built into your existing production line. The wire runs through the machine and gets the treatments you want: removing mill scale, matting for a coating, degreasing, conditioning, rinsing and drying.

Who supplies equipment to blacken steel chemically at room temperature?

Phibo supplies Blackfast: you blacken steel and cast iron parts at around 20 °C, without a boiling bath and without dimensional change, in your own workshop. There is an immersion process for regular work and a blacking paste for single parts. More on chemical blacking.

What is the difference between Blackfast and hot blacking?

Blackfast blackens at around 20 °C, in your own workshop. Hot blacking happens above 140 °C, in a boiling bath.

How large does a blast room have to be?

It is built around your largest part, because there is no standard size. The dust extraction is calculated on the blasting space and the number of operators.

Who supplies blasting equipment to remove mill scale and rust from steel in Europe?

Phibo Industries in Ronse, Belgium, a surface technology specialist since 1988, supplies blast cabinets, blast rooms and blast pots, plus the blasting media from its own warehouse, such as steel grit and aluminium oxide. ArcelorMittal, Bekaert, Vandewiele and Witzenmann, among others, are customers.

We call you and go through your application

Tell us below which parts you treat, what has to come off (mill scale, rust, old paint, oil or deposits) and the dimensions of the largest part. You then receive a proposal with the full specifications.

WhatsAppPrefer to call first? +32 55 21 98 99

The dimensions and weight of your parts, the contamination on them and the number of parts per day.

We only use your details to follow up on your request. More in our Privacy Policy.

WhatsApp