How do I remove weld discolouration from stainless steel without pickling?
With SublimotionProcess®: it treats stainless steel without acids and without chemical waste, across the weld too. Pickling works with acids that have to be disposed of separately. Glass bead blasting gives a uniform look, but in the cleanability test of ACTALIA, traces of micro-organisms remained after CIP cleaning.
Can stainless steel treated with SublimotionProcess® come into contact with food?
Yes. A migration test under EU Regulation 1935/2004 confirmed that the tested samples of treated stainless steel are suitable for contact with all types of food. Welded stainless steel tube with this finish obtained the EHEDG Type EL Class I certificate in 2016 and 2021, cleanable without dismantling.
Does powder slide off stainless steel more easily after SublimotionProcess®?
Yes. In a test by a specialist in machines for dry products, eight food powders, including cocoa, maize starch, flour and milk powder, slid off treated stainless steel at 48° or less in every measurement. With cocoa and maize starch, the stickiest powders in the test, SublimotionProcess® scored best of the five finishes, ahead of polished stainless steel and a competing wet surface treatment process.
What roughness does stainless steel reach after SublimotionProcess®?
On stainless steel sheet with a 2B finish, Phibo guarantees a roughness below 0.6 µm Ra. Measured values are around 0.3 to 0.4 µm. For food contact, the market usually asks for less than 0.8 µm, for surfaces in contact with pharmaceutical products less than 0.6 µm.
Can SublimotionProcess® treat the inside of stainless steel pipework?
Partly. It is a mechanical process by impact, comparable to glass bead blasting: the process gun must be able to reach the surface, ideally at 45° and at least at 30°. A tube can be treated from a diameter of about 50 mm, and the larger the better. A tube with a single bend is treated from both ends. In pipework with several bends, the section between the bends stays out of reach, and SublimotionProcess® is then not the right choice.
How much surface does an operator treat per hour?
About 6 to 12 m² per hour, depending on the part, its shape and the operator. A trained operator works faster. Work systematically, zone by zone, and give the process time: it is not a matter of a quick spray.
How much does a SublimotionProcess® installation cost?
That depends on the size of your parts and the type of installation: the Mistral manual process cabinet or the Tornado process platform, with the modules you need. First we go through it with you in a video call: which parts you treat, what you want to achieve and what your building allows, with images of installations at other customers. Then you receive a budget.
Which blast cabinet gives stainless steel a satin finish with glass beads?
Stainless steel gets a satin finish in a blast cabinet used only for stainless steel, with iron-free glass beads. They give an even, satin matt finish. If the surface has to be hygienically cleanable, choose SublimotionProcess®. More on glass bead blasting stainless steel.
Who supplies crate washers for the food industry in Europe?
Phibo Industries in Ronse, Belgium, a surface technology specialist since 1988, supplies crate washers and conveyor washers that wash, rinse and dry crates, pallets, bins and trays, plus SublimotionProcess® for stainless steel. Refresco and Datwyler, among others, are customers.