Phibo CL19
Cooling
- Order reference
- CL19
- With helmet
- PH‑P CL19
- Cools the air flow to 19 °C below ambient temperature
- Control knob for the desired temperature
- Worn on the belt, belt included
Personal protective equipment
Climate control for the breathing air of your blast helmet
Phibo CL19 cools the breathing air, Phibo CL15 Duo cools or heats it. Both fit the blast helmets PH-P and PH-R.
- For the blast helmets PH-P and PH-R
- Worn on the belt
- From our own warehouse
What is blast helmet climate control?
A blast helmet climate control unit sits between the breathing air filter and the helmet and cools or heats the supplied breathing air relative to the ambient temperature.
Why control the breathing air
Compressed air from the compressor follows the ambient temperature. In a hot blasting hall or on a cold site, that air goes straight into the helmet. The climate unit brings it back to a temperature the operator can keep working in.
The compressed air from the breathing air filter connects to the climate unit with a safety quick coupling. The control knob sets the cooled or heated air flow.
Two climate units
Both fit the blast helmets PH-P and PH-R and are worn on the belt.
Phibo CL15 Duo
Cooling and heating
- Order reference
- CL15 Duo
- With helmet
- PH‑P CL15 Duo
- Cools the air flow to 15 °C below ambient temperature
- Heats the air flow to 30 °C above ambient temperature
- Control knob, worn on the belt, belt included
Frequently asked questions
How many degrees can a climate control unit change the breathing air?
The cooling unit cools the air flow to 19 °C below the ambient temperature. The combined unit cools it to 15 °C below or warms it up to 30 °C above the ambient temperature.
How is the climate control unit connected?
The compressed air from the breathing air filter is connected to the climate control unit, which feeds the blast helmet. The control button sets the cooled or heated air flow.
Why control the temperature of blast helmet air?
The temperature of the breathing air follows the ambient temperature and the location of the compressor. In extreme heat or cold, a climate control unit keeps the air in the helmet bearable during long blasting work.
Also for the operator
Blast helmets
PH-P and PH-R, with the parts of each helmet.
Breathing air filter
Clean breathing air for up to four operators.
Blasting suit
Dry blasting suits and wet blasting equipment.
Blasting gloves
Leather, natural rubber or for wet blasting.
Safety footwear
Safety shoes or safety boots.
Promo set safety equipment
The complete equipment for one operator.
Your installation keeps running
Maintenance, repair and spare parts, directly from Phibo, by our own technicians.
Maintenance
Preventive maintenance in our workshop or at your site. After every service your settings and consumption are reviewed.
More about this service
Spare parts
Blast pots, hoses, guns, rubber flaps and filter cartridges from stock. Non-standard parts we make ourselves.
More about this service
Revision and retrofitting
Modernise an existing installation or convert it to a new process. Revised second-hand installations too.
More about this service
Training
Hands-on training at commissioning, standard with SublimotionProcess® and on request with the other installations. When staff change, we repeat it to suit your team.
More about this serviceWhich climate unit suits your blasting work?
We call you and go through your application: where you blast, in which season and with which helmet. Fill in the form below. Simply reordering? Use the same form or mail sales@phibo.be.