Skip to content
Specialist since 1988

Blasting media

Ceramic bead blasting media that lasts

Hard, round ceramic beads in 9 grain sizes, for ceramic bead blasting, satin finishing and shot peening. Phibo supplies them from its own warehouse, in 25 kg pails or cans.

  • 9 sizes, 0 to 850 µm
  • 25 kg per pail or can
  • Hardness: 50‑65 HRc
Ceramic beads blasting media

What are ceramic beads?

Ceramic beads are round, shock-resistant grains used to clean, deburr, satin-finish and shot peen. They last significantly longer than glass beads and give a uniform roughness with minimal material removal.

Ceramic beads cost more per kilo than glass beads, but last 60 to 200 cycles in the recovery system, compared with 5 to 35 for glass beads. Per blasted part you use less media. We are glad to work out with you what that means for your parts.

Phibo supplies ceramic beads from its own warehouse, in 9 grain sizes. Packaging: 25 kg per pail or can.

Applications

  • Ceramic bead blasting of stainless steel, with a uniform surface roughness
  • Cleaning, deburring and satin finishing of ferrous and non-ferrous metals
  • Shot peening, without iron contamination
  • Many blasting cycles in a cabinet with recovery

Your grain size and packaging

Choose your grain size and add ceramic beads to your quote list. Unsure about the grain? Tell us what you blast and what has to come off.

Ask for grain size advice

What is your application?

We will get back to you with the blasting media and grain size we recommend.

For example rust and old paint on steel, or a satin finish on stainless steel.

We only use your details to follow up on your request. More in our Privacy Policy.

Ceramic beads blasting media

Ceramic beads

Uniform result with minimal material removal. For cleaning, deburring and satin finishing.

Grain sizes
9 sizes, 0 to 850 µm
Packaging
25 kg per pail or can

Full technical specifications
Grain sizes and properties: Ceramic beads
Ceramic beads
Grain sizes0‑125 µm, 0‑63 µm, 30‑63 µm, 45‑90 µm, 63‑125 µm, 125‑250 µm, 250‑425 µm, 425‑600 µm, 600‑850 µm
Packaging25 kg per pail or can
Grain shapespherical
Hardness50‑65 HRc
Compositionceramic, iron-free
Bulk density2.3 kg/l
Number of recycling cycles (indicative)60‑200

Swipe the table to the left to see all columns.

Indicative values from the Phibo product sheets. The number of recycling cycles depends on the working pressure, the material and the grain distribution.

Glass beads or ceramic beads?

Both are round and iron-free and give the same type of finish. Ceramic beads are harder and last much longer than glass beads.

Glass beadsCeramic beads
Hardness5‑6 Mohs50‑65 HRc
Bulk density1.5 kg/l2.3 kg/l
Number of recycling cycles (indicative)5‑3560‑200
Grain sizes9 sizes, 0 to 850 µm9 sizes, 0 to 850 µm
Packaging25 kg per bag, 1000 kg per pallet25 kg per pail or can
Best forSatin finishing and cleaning of stainless steel and aluminiumMany cycles with recovery, also shot peening

Swipe the table to the left to see all columns.

Frequently asked questions

What is the difference between ceramic beads and glass beads?

Ceramic beads are harder and more shock-resistant. They do not break but wear down, so they last much longer and give less consumption and less dust than glass beads.

Are ceramic beads suitable for shot peening?

Yes. Ceramic beads give a shot peening intensity equal to round steel shot and higher than glass beads, without iron contamination.

Why do ceramic beads cost more than glass beads?

Ceramic beads are harder: they wear down instead of breaking. They last 60 to 200 cycles, glass beads 5 to 35. So compare them on the cost per blasted part. Tell us what you blast and we will work it out with you.

How does Phibo pack ceramic beads?

In 25 kg pails or cans. You choose the grain size and the quantity, and add them to your quote list.

They trust the surface technology of Phibo

NMBSRailArcelorMittalMetalworkingBASFChemicalsScaniaAutomotiveBayerPharmaSABCAAerospace

We call you and go through your application

You tell us which part you blast and what has to come off, paint or rust, and we tell you which blasting medium fits. Fill in the form below. Already a customer and simply reordering? Send your order to sales@phibo.be, with the packaging and the quantity.

  • Grain size per abrasive
  • Packaging and quantity per abrasive
  • Application(s)

The product type, the packaging unit and the number of units.

We only use your details to follow up on your request. More in our Privacy Policy.

WhatsApp