Skip to content
Specialist since 1988

Application for cleaning contractors, facade restorers and local authorities

Graffiti removal equipment for walls and glass

Graffiti removal by air-gumming means blasting the paint off with a fine abrasive at low pressure, so the brick, the stone or the glass underneath stays intact. Phibo supplies the mobile MCS², the dust-free MVS² and closed circuit machines, with results on glass and facing brick.

  • Working pressure usually 2.5 to 4 bar
  • For brick, natural stone, concrete and glass
  • Own compressor in the set, fits in a small van
  • Surface technology specialist since 1988
Graffiti half removed from a window, glass clean again on the left

The result

Graffiti gone, brick and joints intact

Many facades, windows and shop fronts are daubed with graffiti. With the widely used conventional methods, it is impossible to remove it without damaging the surface.

Yellow facing brick covered in graffiti, condition before cleaning
Facing brick with graffiti, before.
Graffiti partly removed from yellow facing brick, brick and joints undamaged
The same brick, graffiti partly removed.

How it works

Removing graffiti with the MCS²

Graffiti removal with the MCS² is blasting the paint layer off with a fine, homogeneous abrasive at low pressure. The grain hits the surface at a shallow angle and takes the paint with it. That is how you remove graffiti from walls and glass without damaging the surface underneath.

  1. Test on a hidden spot

    You fix pressure, grain and distance on a spot that is out of sight, before you start on the graffiti.

  2. Mask off

    Cover whatever has to stay clean. With the water option, the MCS² works without dust.

  3. Blast at low pressure

    Usually between 2.5 and 4 bar. The grain hits the surface at a shallow angle and takes the paint with it.

  4. Clean up

    Sweep or vacuum up the abrasive. With the MVS² it stays inside the machine and there is nothing to clean up.

Three machines

Which machine suits which job

The difference is the method, the size of the job and the compressed air you have on site.

MCS²MVS²Closed circuit
Methodair-gumming at low pressurevacuum blasting, projecting and extracting in one movementblasting and extraction, VACU-impact line
Blasting pressureusually 2.5 to 4 barusually 2 to 6 barfrom 1.5 bar, up to 8 bar on the Pro versions
Abrasivepressure vessel of 55 litreshopper of 10 litresfive sizes, from 9 to 48 litres
Hoseblasting hose of 8 mblasting and extraction hose of 5 mup to 60 m on the pneumatic Pro version
Compressed airown compressor, up to 1,300 l/minown compressor, up to 1,300 l/minyour own compressed air, 480 to 10,000 l/min
Maskingneeded, dust-free with the water optionnot needednot needed
Suited tofacades and larger surfacesdetail work of a few m² at mostlocal work up to medium-sized areas, without masking (VS9 to VP48)

Swipe the table to the left to see all columns.

Advantages

Why remove graffiti by air-gumming

The surface stays intact

Low pressure and a fine grain take the paint off brick and natural stone and glass without damaging the surface underneath.

No chemical remover

No chemicals on the facade and no chemical waste on site.

Even where masking is impossible

The MVS² extracts the abrasive in the same movement. You do not have to cover the surroundings.

Works without a mains connection

On the MCS² and the MVS² the compressor runs on its own engine. On a site without power, you simply keep working.

Not sure your surface is suitable? Send a photo of the graffiti and the wall. We'll tell you which machine and which abrasive suit it.

References

They already work with Phibo

A selection of Phibo customers, across different industries.

NMBS logoDe Lijn logoAquafin logoTVH logoDeceuninck logoBridgestone logo

Frequently asked questions

Questions about graffiti removal

Can graffiti be removed from brick, stone and glass without damaging the surface?

Yes, with a fine grain at low pressure, usually between 2.5 and 4 bar. The grain hits the surface at a shallow angle and takes the paint with it, without attacking the carrier. Fix the setting on a spot that is out of sight first.

How do you remove graffiti from brickwork?

With the MCS² you blast the paint off the brick at low pressure. For local work without masking, the MVS² projects and extracts the abrasive in one movement. We help you choose the grain that suits your brick.

Can graffiti be removed from glass and shop windows?

Yes, at low pressure and with a fine grain. The same technique is also used to frost glass on purpose, so test the setting on a corner that is out of sight first. We help you choose the right grain.

Does it create dust?

With the water option, the MCS² works without dust. If no abrasive may escape at all, choose the MVS² or a closed circuit machine.

What does graffiti removal with your own machine cost?

Apart from the set itself, you mainly pay for abrasive. The nozzle, the hoses and the filter wear out under intensive use and are replaced over time. We call you and go through the costs for your work.

Consumables

Get the abrasive from Phibo too

We help you choose the grain that suits your surface. Phibo supplies its abrasives from stock, in the usual pack sizes. Our media contain no free crystalline silica.

Bags of blasting media on pallets in the warehouse

Request

We call you and go through your application

Fill in what you know below, and we go through the rest together on the phone.

  • Which surfaces you remove graffiti from: brick, natural stone, concrete or glass
  • How many m² or jobs per month
  • Whether you work outdoors or also inside buildings
  • A photo of the graffiti, via WhatsApp if you like
WhatsAppPrefer to call first? +32 55 21 98 99

The surface, how many m² or jobs per month, and whether you work outdoors or indoors.

We only use your details to follow up on your request. More in our Privacy Policy.

WhatsApp